Description
The printer has detected a problem with the Drop Detector.
Remedy
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Drop Detector cable is not damaged and is correctly connected to the PrintMech PCA. • Check that the Service Station cable is not damaged and is correctly connected to the PrintMech PCA. • Replace the Drop Detector refer Drop Detector. • Reset the Calibration Flag of the Drop Detector Drop Detector Calibration. • If the System Error continues, replace the PrintMech PCA refer PrintMech PCA. • If the System Error continues, replace the Formatter refer Formatter.