Description
ISS Optotrip failure
Causes:
Remedy
Remote troubleshooting (call agent)1. Switch the power off and disconnect the power cord. Reconnect the power cord and power on the printer.2. Go to Support Menu, see Entering the support menus and run the ISS diagnostic test, see 4.12 ISS. 3. Depending on the result, the call agent should arrange a service engineer visit to change the ISS.Onsite troubleshooting and solution (service engineer)1. Ensure the ISS cables are properly fit, and reconnect them as needed.2. Ensure there isn’t any ink spot or media debris around the opto sensors that might prevent their correct function.3. Replace the ISS, see ISS.