Description
Scanner Bundle Board PCA
Causes: Main PCA
Remedy
Remote troubleshooting (call agent)1. Switch the power off and disconnect the power cord. Reconnect the power cord and power on the printer.2. The call agent should arrange a service engineer visit to change the Scanner Bundle PCA, and follow the Onsite troubleshooting below: Scanner Bundle Board. Board3. If a different system error is displayed then the call agent should perform the applicable troubleshooting procedure.Onsite troubleshooting and solution (service engineer)1. Remove covers and check that the cables in the Scanner Bundle PCA and associated parts are correctly connected and not damaged. If any cable is disconnected then reconnect it, and power on the printer again to check whether the system error has disappeared. IMPORTANT: If any cable is damaged then order the appropriate Service Kit: Cables and Sensors 2. Replace the Scanner Bundle PCA, see Scan Bundle Board F9A30-67029. 3. Replace the Main PCA (MPCA See Main PCA)