Error Codes

Code 56:YZ

Description Drive roller analog encoder homing (also known as “zero search”) failed. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Perform…

Code 55:YZ

Description Problem with the Line Sensor. The product has detected a failure to access the Line Sensor EEPROM. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and…

Code 52:10

Description The product has detected a failure in the Drop Detector. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that…

Code 51:YZ

Description Scanner Position Sensor failure Remedy 1. Check that the Scanner Position Sensor cable is not damaged and is correctly connected to the Engine PCA. 2. Perform the Sensors Test to troubleshoot the problem further. See Sensors Test. 3. Replace…

Code 48:YZ

Description PPS system failure Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the Pen to Paper Space (PPS) Solenoid…

Code 47:YZ

Description Starwheels motor error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible obstacles restricting the movement of…

Code 45.2:YZ

Description An error with the Rewinder 2 System (Lower Rewinder) has been detected . Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 2. Reconnect the power…