Code 78.1:YZ
Description Media settings area missing in paper settings file Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the product…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 78:08
Description The job received cannot be printed without borders on this paper. Remedy Use a paper that supports borderless printing. NOTE: This system error code does not require service help. It should be resolved by the customer.
Code 79:YZ
Description Generic firmware error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the product has the latest firmware version.…
Code 81:01
Description Paper axis error—the copier will restart and run a diagnostic test Remedy None
Code 81:YZ
Description Problem with paper advance. This source of error could come from an error in any of the following systems: paper motor, disk encoder, cables or main electronics. Remedy This error can occur because the product has been dropped during…
Code 86:01
Description Scan axis error—the copier will restart and run a diagnostic test Remedy None
Code 86:11
Description Scan Axis movement requires too much force or energy. Remedy 1. Check that the cutter disengages correctly. 2. Lubricate the scan axis. 3. Use Preventive Maintenance Kit 1.
Code 87.01
Description Problem finding the Scan-axis encoder reading Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Make sure that the encoder strip…
Code 87:YZ
Description Problem with the Carriage Encoder Sensor readings Remedy 1. Check that the encoder sensor is correctly connected to the Carriage PCA. 2. Make sure the Encoder Strip is not broken or damaged. If necessary, replace it. See Encoder Strip,…
Code 93:YZ
Description Unable to pressurize the Ink Delivery System Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Perform the Ink Delivery System…
Code XX.n:YZ.m
Description Error Codes Format: • XX: Subsystem or process (2 digits). • n: Subsystem or process index (if more than one used in the product) – optional. e.g. Identify the Ink Supply (color and number). • Y: Who should perform…
Code 45.2:YZ
Description An error with the Rewinder 2 System (Lower Rewinder) has been detected . Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 2. Reconnect the power…