Code 41:YZ
Description Electrical fault or current limit in Media-Axis Motor Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 42:YZ
Description Electrical problem (fault, current limit, overheating) in Scan-Axis Motor Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any…
Code 45.1:YZ
Description An error with the Rewinder 1 System (Upper Rewinder) has been detected. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 1. Reconnect the power cord…
Code 71:04
Description Out of memory. The total memory available in the product depends on its configuration. It is reported as HPGL/ 2 memory or PS/PDF memory. If the amount of memory that the product needs to process the file is more…
Code 72.02:09
Description Generic firmware Error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the product has the latest firmware version.…
Code 72.02:YZ
Description A service calibration should be performed. Remedy To find out which service calibration to perform, print the calibration status. At the Touch Control Panel, select the Internal Prints icon, then Service information > Print calibration status. Perform whichever calibration…
Code 74.08:04
Description Problem with the firmware upgrade process Remedy 1. Reboot the Product 2. Try to upgrade the firmware again, for more information, see Appendix B: Emergency firmware upgrade with USB flash drive 3. Download again the firmware file from the…
Code 74.1:YZ
Description Error uploading paper profile update file Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Make sure the connection between the…
Code 74:YZ
Description Error uploading firmware update file Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Make sure the connection between the computer…
Code 75.21:YZ
Description The spittoons (Left Spittoon, Service Station) have reached 80% capacity. Remedy Use Preventive Maintenance Kit #2 to replace the Left Spittoon and Service Station.
Code 75.22:YZ
Description The spittoons (Left Spittoon, Service Station) are full. Remedy Use Preventive Maintenance Kit #2 to replace the Left Spittoon and Service Station.
Code 76:YZ
Description Hard disk drive is full. Remedy Remove any unnecessary files from the hard disk using the Embedded Web Server. If the problem persists, run the Hard Disk Recovery Utility (see Hard Disk Recovery Utility).