Code 21:YZ
Description Failure moving Service Station Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power on the product. 2. Make sure that the…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 22.0:YZ
Description Left Ink Supply Station error, module 0. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the cables between…
Code 01.0:YZ
Description Communication with Engine PCA failed Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Remove the Formatter and reinsert it again.…
Code 01.1:YZ
Description Error in the Engine PCA Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Replace the Engine PCA. 3. Replace the…
Code 01.2:YZ
Description Failure communicating with an Ink Supply Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Perform the Ink Delivery System diagnostic…
Code 02.1:YZ
Description Problem with the Carriage PCA Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the Trailing Cable is not…
Code 03.0:10
Description Battery of Real Time Clock ran down Remedy Replace the battery.
Code 03:YZ
Description Problem with Power Supply Unit Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Replace the Power Supply Unit (PSU). See…
Code 06:YZ
Description Failure reading/writing NVM in Hard disk Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Replace the Hard Disk.
Code 07.01:11
Description DelSol3 ASIC not found or not responding Remedy 1. Check the condition and connections of the Interconnect data and power cable, replace if necessary
Code 07.02:11
Description USB Cable not connected Remedy 1. Check the condition and connections of the USB cable, replace if necessary.
Code 07.03:10
Description USB Hub not found Remedy 1. Make sure Interconnect board connector labeled 'INPUT HUB' is properly connected. 2. Make sure Wukong board connector labeled JUSB2 is properly connected to the cable coming from Interconnect board. 3. If failure continues,…