Code 76:YZ
Description Hard disk drive is full. Remedy Remove any unnecessary files from the hard disk using the Embedded Web Server. If the problem persists, run the Hard Disk Recovery Utility (see Hard Disk Recovery Utility).
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 78:08
Description The job received cannot be printed without borders on this paper. Remedy Use a paper that supports borderless printing. NOTE: This system error code does not require service help. It should be resolved by the customer.
Code 79:YZ
Description Generic firmware error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the product has the latest firmware version.…
Code 81:01
Description Paper axis error—the copier will restart and run a diagnostic test Remedy None
Code 45.1:YZ
Description An error with the Rewinder 1 System (Upper Rewinder) has been detected. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 1. Reconnect the power cord…
Code 45.2:YZ
Description An error with the Rewinder 2 System (Lower Rewinder) has been detected . Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 2. Reconnect the power…
Code 47:YZ
Description Starwheels motor error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible obstacles restricting the movement of…
Code 48:YZ
Description PPS system failure Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the Pen to Paper Space (PPS) Solenoid…
Code 51:YZ
Description Scanner Position Sensor failure Remedy 1. Check that the Scanner Position Sensor cable is not damaged and is correctly connected to the Engine PCA. 2. Perform the Sensors Test to troubleshoot the problem further. See Sensors Test. 3. Replace…
Code 52:10
Description The product has detected a failure in the Drop Detector. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that…
Code 55:YZ
Description Problem with the Line Sensor. The product has detected a failure to access the Line Sensor EEPROM. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and…
Code 56:YZ
Description Drive roller analog encoder homing (also known as “zero search”) failed. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Perform…