Description Service station Service Station servo shutdown. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Check the Primer Tubes. Reconnect the power cord and power On the Printer. • Perform the…
Description Service station Fail moving Service Station. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Check the Primer Tubes. Reconnect the power cord and power On the Printer. • Make sure…
Description Bongo error BPS0 (ISS Left) ISS Left BPS0 error.(Supplies 0, 1, 2). Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. •…
Description Bongo error BPS1 (ISSLeft) ISS Left BPS1 error.(Supplies 3, 4, 5). Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check…
Description Tube assembly (IDS) Ink Setup failure( Ink Delivery System (IDS) Tubes purge failed). Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.…
Description Ink Cartridge (color = n) Order of Ink Supplies incorrect. (color = n) Remedy • Remove the Ink Supply Cartridges and check that they are the correct ones for this printer and are in the proper order. • Check…
Description Printhead error An error has occurred in Printhead detection. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Remove the Printheads…
Description An error has occurred in Printhead detection. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Remove the Printheads from the…
Description Cutter An error has been detected with the cutter. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check the Cutter…
Description Add-on Electronics module (printmech) NVM backup: not found, read, write or read back error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the…
Description Print Mech PCA Print Mech PCA fault or NVM backup failure. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If…
Description Carriage PCA Encoder seems to be wrong. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable…
