Code 01:11
Description The Electronics Module is incorrectly positioned. Remedy Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 01:12
Description Electronics Module failed during the firmware upgrade OR the Electronics Remedy Module failed during initialization.
Code 02:10
Description Carriage failure. Remedy Replace the Carriage Assembly
Code 02:10
Description Carriage failure. Remedy Replace the Carriage Assembly
Code 04:13
Description Generic Firmware Error (Network Card). Remedy Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue
Code 08:11
Description Front Panel cannot be detected. Remedy Reconnect the Front Panel.
Code 11:10
Description Trailing Cable Failure. Remedy Replace the Carriage Assembly. Replace the Electronics Module
Code 11:11
Description Trailing Cable is badly connected. Remedy Reconnect the Trailing Cable correctly to the Electronics Module. If the Error Code continues, replace the Carriage Assembly
Code 21:10
Description Service Station failure. Remedy Replace the Service Station Assembly
Code 22:10
Description Ink Supply Station failure. Remedy Replace the Ink Supply Station
Code 270:00
Description Color Calibration Failure – Color Calibration cancelled. Remedy Clean the electrical contacts on the black printhead. If the error code continues, replace the black printhead.
Code 271:00
Description Color Calibration Failure – Color Calibration cancelled. Remedy Clean the electrical contacts on the cyan printhead. If the error code continues, replace the cyan printhead.