O2ML9YjB9mA2

Description Paper-Axis Motor failure Remedy Replace the Paper-Axis Motor

Description Error in the Paper-Axis Motor Encoder quadrature. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code continues, replace the Paper-Axis Motor

Description The Electronics Module Cooling Fan badly connected. Remedy Reconnect the Cooling Fan (located on top of the Electronics Module). If the Cooling Fan continues to fail, check that the connector pins in the Electronics Module are NOT bent.

Description The EEROM is not configured correctly (the product number may Remedy Configure the EEROM correctly using the EEROM setup utility

Description Electronics Module failure. The possible cause could be: 1. One of the ASIC’s in the Electronics Module is reporting that it is too hot. 2. The interruptions from the Scan-Axis servo or from the Paper-Axis servo are not coming…

Description Carriage failure. The possible cause could be: 1. The Carriage PCA is not compatible with the rest of the Printer. 2. The Carriage ASIC has problems initializing. 3. The +2.5V reference voltage generated in the Carriage PCA is out…

Description Carriage failure. The possible cause could be: 1.One of the ASIC’s in the Carriage is reporting that it is too hot. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if…

Description Power Supply failure. Remedy Replace the Power Supply Unit

Description LAN Card not detected. Remedy Power OFF the Printer and reconnect the LAN Card.

Description Formatter installed instead of HP-GL/2 Accessory Card. Remedy Power OFF the Printer and remove the Formatter and install the HPGL/2 Accessory Card

Description Formatter not detected. Remedy Power OFF the Printer and reconnect the Formatter.

Description Scan-Axis Motor failure. Remedy Replace the Scan-Axis Motor