O2ML9YjB9mA2

O2ML9YjB9mA2

  • Joined: May 14, 2026
  • Articles: 1298

Code 85:10

Description Paper-Axis Encoder error. The Drive Roller Encoder Sensor cannot find the zero position of the Encoder Disk. Remedy Replace the Drive Roller Encoder Sensor If the Error Code continues, replace the Drive Roller

Code 86:01

Description Carriage-Axis shutdown. Remedy Too much friction in the Slider Rod. Enter the Printer Information utility and check the Scan-Axis usage. If the percentage is close to 100%, then lubricate the Slider Rod .The Carriage is bumping into the Service…

Code 86:11

Description Carriage-Axis shutdown (during the Carriage Movement test). Remedy Too much friction in the Slider Rod. Enter the Printer Information utility and check the Scan-Axis usage. If the percentage is close to 100%, then lubricate the Slider Rod .The Carriage…

Code 86:13

Description Carriage-Axis shutdown (Firmware Error). Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code reappears, check for a new Firmware release.

Code 87:13

Description Unable to read the Carriage Encoder Sensor. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code continues, replace the Carriage Assembly…

Code 93:10

Description Ink System startup failed Remedy Check for a leak in the Printer. If a leak is evident (there is ink on Printer components), replace the Ink Supply Tubes Perform the Prime Tubes utility and check how long it takes…

Code 56:13

Description Error in the Drive Roller Encoder Sensor quadrature. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code continues, replace the Drive…

Code 61:04

Description Firmware Error. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code reappears, check for a new Firmware release.

Code 61:05

Description Error Processing Job. Remedy • Switch the Printer Off and wait a few minutes. Switch the Printer On again and resend the file that you were trying to print. • If the Error Code reappears after resending the file,…