O2ML9YjB9mA2

O2ML9YjB9mA2

  • Joined: May 14, 2026
  • Articles: 1298

Code 22:10

Description Ink Supply Station failure. The possible cause could be: 1. Reading, writing or initializing the backup EEROM failed. 2. One of the out-of-ink sensors (located in the Ink Supply Station) is not reporting what it should during the initializing…

Code 41:13

Description Error in the Paper-Axis Motor Encoder quadrature. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code continues, replace the Paper-Axis Motor

Code 01:10

Description Electronics Module failure. The possible cause could be: 1. The Electronics Module is of the wrong type (a 16 MB Electronics Module will not work in a 24" Model). 2. Reading, writing or initializing the EEROM failed. 3. One…

Code 01:11

Description The Electronics Module Cooling Fan badly connected. Remedy Reconnect the Cooling Fan (located on top of the Electronics Module). If the Cooling Fan continues to fail, check that the connector pins in the Electronics Module are NOT bent.

Code 01:13

Description Electronics Module failure. The possible cause could be: 1. One of the ASIC’s in the Electronics Module is reporting that it is too hot. 2. The interruptions from the Scan-Axis servo or from the Paper-Axis servo are not coming…

Code 02:10

Description Carriage failure. The possible cause could be: 1. The Carriage PCA is not compatible with the rest of the Printer. 2. The Carriage ASIC has problems initializing. 3. The +2.5V reference voltage generated in the Carriage PCA is out…

Code 02:13

Description Carriage failure. The possible cause could be: 1.One of the ASIC’s in the Carriage is reporting that it is too hot. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if…