Code 05:09
Description Formatter installed instead of HP-GL/2 Accessory Card. Remedy Power OFF the Printer and remove the Formatter and install the HPGL/2 Accessory Card
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 05:10
Description Formatter not detected. Formatter failure. Remedy Power OFF the Printer and reseat the Formatter.
Code 05:11
Description Formatter not detected. Remedy Power OFF the Printer and reconnect the Formatter.
Code 08:11
Description Front Panel cannot be detected. Remedy Reconnect the Front Panel.
Code 11:11
Description Trailing Cable badly connected. Remedy Reconnect the Trailing Cable correctly.
Code 11:13
Description Problem with setting the voltage of the Printheads. Remedy Check that the Trailing Cable is connected correctly at both ends. Replace the Trailing Cable Replace the Carriage Assembly
Code 42:10
Description Scan-Axis Motor failure. Remedy Replace the Scan-Axis Motor
Code 71:06
Description Out of Memory problem. Remedy • Look on your computer screen for error messages; some drivers allow you to choose a different printing mode and attempt to send the file again. If necessary, select Send Job as a Bitmap…
Code 72:04
Description Problem in the Scan-Axis (Firmware Error). Remedy • Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. • If the Error Code reappears, check for a…
Code 79:04
Description Firmware Error. Remedy • Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. • If the Error Code reappears, check for a new Firmware release.
Code 81:01
Description Paper-Axis shutdown. Remedy Perform the Paper Advance Test. If the problem persists, replace the Encoder Disk Assembly.
Code 81:11
Description Paper-Axis shutdown (during the Paper Advance test). Remedy Perform the Paper Advance Test. If the problem persists, replace the Encoder Disk Assembly.