Code 71:08
Description Insufficient display list Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Resend the job with one…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 72.02
Description A service calibration should be performed (advisory) Remedy Call agent: • To find out which service calibration to perform, print the calibration status. At the front panel, press , then , then Internal prints > Service information prints >…
Code 74.08:04
Description Firmware update problem Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Try again to update the…
Code 74.1:04
Description Error uploading paper preset (advisory) Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Ensure that the…
Code 74:01
Description Error uploading firmware update file (advisory) Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Ensure that…
Code 76:03
Description The hard disk is full Remedy Call agent: 1. Remove any unnecessary files from the hard disk using the Embedded Web Server. 2. Run the Hard Disk Recovery Utility.
Code 41:03
Description Electrical problem (fault, current limit, overheating) in paper-axis motor Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer.…
Code 42:03
Description Electrical problem (fault, current limit, overheating) in scan-axis motor Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. 2. Reconnect the power cord, then turn on the…
Code 45.1:03, 45.1:10
Description Error in the rewinder 1 system (upper rewinder) Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Remove the paper from roll 1. Reconnect the power cord,…
Code 45.2:03, 45.2:10
Description Error in the rewinder 2 system (lower rewinder) Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Remove the paper from roll 2. Reconnect the power cord,…
Code 46.1:10
Description Error in the upper pump of the PHA blowing system Remedy Call agent: • Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the…
Code 46.2:10
Description Error in the lower pump of the PHA blowing system Remedy Call agent: • Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the…