O2ML9YjB9mA2

Description Unable to pressurize the Ink Delivery System Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Perform the Ink Delivery System…

Description Error Codes Format: • XX: Subsystem or process (2 digits). • n: Subsystem or process index (if more than one used in the product) – optional. e.g. Identify the Ink Supply (color and number). • Y: Who should perform…

Description Communication with Engine PCA failed Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Remove the Formatter and reinsert it again.…

Description Power cable of the Scanner is failing Remedy Check the condition and connections of the Scanner Power cable, if necessary replace the cable.

Description USB cable of the Scanner is failing Remedy Check the condition and connections of the Scanner USB cable, if necessary replace the cable.

Description Scanner is in SAFE MODE Remedy Restart the product, if the problem persists replace the SCU. See Scanner Controller Board (MFP only).

Description Scanner SCU is failing Remedy Replace the Scanner SCU.See Scanner Controller Board (MFP only).

Description Media jam in Scanner Remedy 1. Open the CIS to solve the media jam and close it again. 2. If no paper is seen, run Scanner Motor Diagnostic, refer to the Users Guide for further details.

Description Scanner not calibrated Remedy Calibrate the Scanner

Description File I/O Error Remedy Reboot Product

Description Contex Library failed to load Remedy 1. Reboot the Product 2. Upgrade the firmware For more information

Description Trailing Cable does not seem to be detected Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the Trailing…