Error Codes

Code 72:YZ

Description Firmware error Generic Firmware error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest…

Code 71:YZ

Description Memory management Out of memory failure. Remedy • It is recommended that you remove any unnecessary files from the Hard Disk Drive of the Formatter using the Web Server.

Code 71:19

Description PrintMech PCA/Formatter Default Serial Number found in the main and backup NVM. It seems that both the Print Mech PCA and Hard Disk Drive have been replaced together. Remedy • Perform the “Error 71:19 Recovery” Service Utility. You MUST…

Code 68:YZ

Description Loss of engine counters tracking Loss of engine counters tracking. Remedy • Reboot the printer. The printer will continue to function correctly, but the life counters will not continue counting until you restart the printer.

Code 67:YZ

Description Input/output through FireWire port Input/Output problem through a Firewire Port. Remedy • Check that the firewire cable is correctly connected to the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to…

Code 66:YZ

Description Input/output (not known what port) Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded. Remedy • Resend the file…

Code 65:YZ

Description Input/output (not known what port) Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power…

Code 64:YZ

Description Input/output through USB port Input/Output problem through the USB Port. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that…

Code 63:YZ

Description Input/output through LAN card Input/Output problem through the Network Card. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that…

Code 62:YZ

Description PC Interface PC Interface Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Get the latest version of the firmware.

Code 61:YZ

Description Error job The file format is incorrect and the Printer cannot process the job. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the…

Code 58:YZ

Description The Line Sensor of the printer is not functioning correctly. Either the Line Sensor shutter has failed to open, there is a failure to communicate with the Line Sensor, the Line Sensor is not calibrated correctly, or the firmware…