Description Roll 1 switch failed (standby or resume). Roll 1 has been unloaded. Remedy There is no corrective action. This system warning code only notifies the user that the roll has been unloaded because an unexpected error occurred with Roll…
Description Ink supply error found during IDS diagnostic test. In the Touch Control Panel message you will see letters representing the names of the colors of the faulty supplies. Remedy 1. Reseat the faulty ink supply and repeat the Ink…
Description Ink Setup failure Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Insert the new purgers, reconnect the power cord and power on the product. 2. Perform the Ink Delivery System…
Description Left Ink Supply Station error, module 1 Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the cables between…
Description Left Ink Supply Station error, module 0. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the cables between…
Description Failure moving Service Station Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power on the product. 2. Make sure that the…
Description Failure testing the length of the Service Station path Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power on the product.…
Description Failure moving the Primer Motor of the Service Station Remedy 1. Remove the Right Cover and make sure the cables from the Engine PCA to the Service Station are connected and are not damaged. In case of any damage…
Description No communication between the product and the Touch Control Panel Remedy 1. Check the event log at the EWS support pages to see if there is another SE (for instance 07:10) and troubleshoot the problem more accurately.Appendix C: Obtaining…
Description A feature on the Touch Control Panel hangs or will not function (copy,scan etc) Remedy 1. Turn off the product and turn on again, and check to see if the error remains. 2. Upgrade the firmware For more information,…
Description Error in the Engine PCA Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Replace the Engine PCA. 3. Replace the…
Description Error Codes Format: • XX: Subsystem or process (2 digits). • n: Subsystem or process index (if more than one used in the product) – optional. e.g. Identify the Ink Supply (color and number). • Y: Who should perform…
