Code 09:04
Description Contex Library failed to load Remedy 1. Reboot the Product 2. Upgrade the firmware For more information
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 11:YZ
Description Trailing Cable does not seem to be detected Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the Trailing…
Code 21.1:YZ
Description Failure moving the Primer Motor of the Service Station Remedy 1. Remove the Right Cover and make sure the cables from the Engine PCA to the Service Station are connected and are not damaged. In case of any damage…
Code 21.2:YZ
Description Failure testing the length of the Service Station path Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power on the product.…
Code 21:YZ
Description Failure moving Service Station Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power on the product. 2. Make sure that the…
Code 22.0:YZ
Description Left Ink Supply Station error, module 0. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the cables between…
Code 22.1:YZ
Description Left Ink Supply Station error, module 1 Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the cables between…
Code 24:YZ
Description Ink Setup failure Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Insert the new purgers, reconnect the power cord and power on the product. 2. Perform the Ink Delivery System…
Code 26:01
Description Ink supply error found during IDS diagnostic test. In the Touch Control Panel message you will see letters representing the names of the colors of the faulty supplies. Remedy 1. Reseat the faulty ink supply and repeat the Ink…
Code 39.1:01
Description Roll 1 switch failed (standby or resume). Roll 1 has been unloaded. Remedy There is no corrective action. This system warning code only notifies the user that the roll has been unloaded because an unexpected error occurred with Roll…
Code 39.2:01
Description Roll 2 switch failed (standby or resume). Roll 2 has been unloaded. Remedy There is no corrective action. This system warning code only notifies the user that the roll has been unloaded because an unexpected error occurred with Roll…
Code 41:YZ
Description Electrical fault or current limit in Media-Axis Motor Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible…