Code 55:YZ
Description Problem with the Line Sensor. The product has detected a failure to access the Line Sensor EEPROM. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 56:YZ
Description Drive roller analog encoder homing (also known as “zero search”) failed. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Perform…
Code 59.1:09
Description Two electrical parts have been replaced at the same time. Remedy Replace one part at a time, and restart the product before replacing another.
Code 59.2:00
Description An unsupported or reused part has been installed. Remedy Install only new parts recommended by HP for this product.
Code 74.1:YZ
Description Error uploading paper profile update file Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Make sure the connection between the…
Code 74:YZ
Description Error uploading firmware update file Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Make sure the connection between the computer…
Code 75.21:YZ
Description The spittoons (Left Spittoon, Service Station) have reached 80% capacity. Remedy Use Preventive Maintenance Kit #2 to replace the Left Spittoon and Service Station.
Code 75.22:YZ
Description The spittoons (Left Spittoon, Service Station) are full. Remedy Use Preventive Maintenance Kit #2 to replace the Left Spittoon and Service Station.
Code 76:YZ
Description Hard disk drive is full. Remedy Remove any unnecessary files from the hard disk using the Embedded Web Server. If the problem persists, run the Hard Disk Recovery Utility (see Hard Disk Recovery Utility).
Code 78.1:YZ
Description Media settings area missing in paper settings file Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the product…
Code 78:08
Description The job received cannot be printed without borders on this paper. Remedy Use a paper that supports borderless printing. NOTE: This system error code does not require service help. It should be resolved by the customer.
Code 79:YZ
Description Generic firmware error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the product has the latest firmware version.…