O2ML9YjB9mA2

Description USB Scanner connected to incorrect port Remedy Ensure that the USB cable from the Scanner to the Interconnect board is connected at the connection labeled 'SCANNER' and not 'HOST CON'

Description Scanner Motor is failing Remedy 1. Perform the Scanner motor diagnostics. 2. Replace the Scanner Motor Scanner Motor Assembly (MFP only)

Description CIS A Element is failing Remedy Replace CIS A Element CIS Element (MFP only)

Description CIS B Element is failing Remedy Replace CIS B Element CIS Element (MFP only)

Description CIS C Element is failing Remedy Replace CIS C Element CIS Element (MFP only)

Description CIS D Element is failing Remedy Replace CIS D Element CIS Element (MFP only)

Description Electrical problem (fault, current limit, overheating) in Scan-Axis Motor Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any…

Description An error with the Rewinder 1 System (Upper Rewinder) has been detected. Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 1. Reconnect the power cord…

Description An error with the Rewinder 2 System (Lower Rewinder) has been detected . Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 2. Reconnect the power…

Description Starwheels motor error Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible obstacles restricting the movement of…

Description Initialization error Remedy 1. Switch the power off from the back of the product, wait two minutes, then switch it back on again. 2. Check the power cord; try connecting it to another power socket. 3. Check that the…

Description The PostScript fonts seem to be missing. Remedy Perform a firmware upgrade to re-install the fonts.