O2ML9YjB9mA2

O2ML9YjB9mA2

  • Joined: May 14, 2026
  • Articles: 1298

Code 24:YZ

Description Ink Setup failure Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Insert the new purgers, reconnect the power cord and power on the product. 2. Perform the Ink Delivery System…

Code 26:01

Description Ink supply error found during IDS diagnostic test. In the Touch Control Panel message you will see letters representing the names of the colors of the faulty supplies. Remedy 1. Reseat the faulty ink supply and repeat the Ink…

Code 39.1:01

Description Roll 1 switch failed (standby or resume). Roll 1 has been unloaded. Remedy There is no corrective action. This system warning code only notifies the user that the roll has been unloaded because an unexpected error occurred with Roll…

Code 39.2:01

Description Roll 2 switch failed (standby or resume). Roll 2 has been unloaded. Remedy There is no corrective action. This system warning code only notifies the user that the roll has been unloaded because an unexpected error occurred with Roll…

Code 08:08

Description A feature on the Touch Control Panel hangs or will not function (copy,scan etc) Remedy 1. Turn off the product and turn on again, and check to see if the error remains. 2. Upgrade the firmware For more information,…

Code 08:11

Description No communication between the product and the Touch Control Panel Remedy 1. Check the event log at the EWS support pages to see if there is another SE (for instance 07:10) and troubleshoot the problem more accurately.Appendix C: Obtaining…

Code 41:YZ

Description Electrical fault or current limit in Media-Axis Motor Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible…