Code 61:04.2
Description Unknown PostScript ID sent to printer (advisory) Remedy Call agent: • Update the firmware.
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 61:08
Description Incorrect paper type specified in job (advisory) Remedy Call agent: • Change the paper type and resend the job.
Code 61:08.1
Description Job cannot be printed because it is password-protected (advisory) Remedy Call agent: • Resend the job without password protection.
Code 61:08.2
Description Job contains format errors or incorrect settings (advisory) Remedy Call agent: 1. Ensure that the file format sent is supported by the printer. 2. Resend the job using the Embedded Web Server.
Code 61:09
Description Unexpected end of job (advisory) Remedy Call agent: 1. Resend the job. 2. Resend the job using the Embedded Web Server.
Code 61:10
Description Job timed out (advisory) Remedy A slow computer processing complex files can pause for longer than the default printer timeout, in which case some elements of the job may be lost. Call agent: 1. Increase the I/O timeout using…
Code 63:04
Description Network interface error Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Check that the network cable…
Code 01.0:YZ
Description Communication with Engine PCA failed Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Remove the Formatter and reinsert it again.…
Code 03.0:10
Description Battery of Real Time Clock ran down Remedy Replace the battery.
Code 03:YZ
Description Problem with Power Supply Unit Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Replace the Power Supply Unit (PSU). See…
Code 06:YZ
Description Failure reading/writing NVM in Hard disk Remedy 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Replace the Hard Disk.
Code 07.01:11
Description DelSol3 ASIC not found or not responding Remedy 1. Check the condition and connections of the Interconnect data and power cable, replace if necessary