Error Codes

Description Carriage failure. Remedy Replace the Carriage Assembly

Description Carriage failure. Remedy Replace the Carriage Assembly

Description Electronics Module failed during the firmware upgrade OR the Electronics Remedy Module failed during initialization.

Description The Electronics Module is incorrectly positioned. Remedy Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.

Description Firmware Error (during Printhead Alignment). Remedy Upgrade the printer to the latest firmware release.

Description Paper-Axis Encoder error. Remedy Make sure that the Encoder Sensor cable is connected correctly. ?Replace the Paper-Axis Motor Drive Assembly. ?Replace the Electronics Module

Description Sheet feeding failure. Remedy Replace the Out-Of-paper Sensor. Replace the Electronics Module

Description The paper is rejected from the Bypass due to skew. Remedy When manually loading paper from the front of the paper, make sure that it is loaded straight.

Description Paper-Axis shutdown – usually a paper-jam caused by a blockage of the Paper-axis System. Remedy If this error code was caused by a paper-jam, unplug the power cable from the printer and clear the blockage. Plug in the power…

Description Paper-Axis shutdown – usually a paper-jam caused by a blockage of the Paper-axis System. Remedy If this error code was caused by a paper-jam, unplug the power cable from the printer and clear the blockage. Plug in the power…

Description Error in the Paper-Axis Motor Encoder quadrature. Remedy Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code continues, replace the Paper-Axis Motor

Description Paper-Axis Motor failure Remedy Replace the Paper-Axis Motor