Description Input/output through FireWire port Input/Output problem through a Firewire Port. Remedy • Check that the firewire cable is correctly connected to the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to…
Description Input/output (not known what port) Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded. Remedy • Resend the file…
Description Input/output (not known what port) Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power…
Description Input/output through USB port Input/Output problem through the USB Port. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that…
Description Input/output through LAN card Input/Output problem through the Network Card. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that…
Description PC Interface PC Interface Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Get the latest version of the firmware.
Description Error job The file format is incorrect and the Printer cannot process the job. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the…
Description The Line Sensor of the printer is not functioning correctly. Either the Line Sensor shutter has failed to open, there is a failure to communicate with the Line Sensor, the Line Sensor is not calibrated correctly, or the firmware…
Description Drive roller analog encoder sensor Drive roller analog encoder sensor fail or calibration failed. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the…
Description Line sensor Problem with the Line Sensor. The printer has detected a failure to access Line Sensor EEPROM). Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord…
Description Drop detector The printer has detected a problem with the Drop Detector Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. •…
Description Window Sensor Window Sensor failure Remedy • Check that the Window Position Sensor cable is not damaged and is correctly connected to the PrintMech PCA. • Perform the Sensors Test to troubleshoot the problem further . Page 4- 31.…
