Error Codes

Code 48:YZ

Description PPS mechanism PPS system failure Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Pen to Paper Space…

Code 08:YZ

Description Front panel Problem with the Front Panel. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Front Panel…

Code 06:YZ

Description Formatter Main NVM failure – not detected, read/write failed or readback error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. •…

Code 05.1:YZ

Description Fan of the Formatter CPU Fan is stopped or burnt. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the…

Code 03:YZ

Description Power supply Problem with Power Supply Unit. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Electronics Module Test…

Code 02.2:YZ

Description Carriage PCA Problem with the Carriage PCA. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable…

Code 02.1:YZ

Description Carriage PCA Encoder seems to be wrong. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable…

Code 01.2:YZ

Description Print Mech PCA Print Mech PCA fault or NVM backup failure. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If…

Code 01.1:YZ

Description Add-on Electronics module (printmech) NVM backup: not found, read, write or read back error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the…

Code XX.n:15

Description YZ part of the System Error Code or Warning Qualified personnel assistance required Upgrade driver or computer software Remedy Upgrade driver or computer software

Code XX.n:14

Description YZ part of the System Error Code or Warning Qualified personnel assistance required Upgrade system firmware Remedy Upgrade system firmware