Error Codes

Code 22.3:YZ

Description Right Ink Supply Station error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Right…

Code 22.2:YZ

Description Right Ink Supply Station error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Right…

Code 22.1:YZ

Description Left Ink Supply Station error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Left…

Code 22.0:YZ

Description Left Ink Supply Station error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Left…

Code 21:YZ

Description Fail moving Service Station. Remedy • Remove the Right Cover and make sure the cables from the Printmech PCA to the Service Station are connected and are not damaged. • Make sure that the Service Station path is clear.…

Code 21.1:YZ

Description Fail moving the Primer Motor of the Service Station. Remedy • Remove the Right Cover and make sure the cables from the Printmech PCA to the Service Station are connected and are not damaged. • Perform the Service Station…

Code 11:YZ

Description Trailing Cable does not seem to be detected. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing…

Code 08:YZ

Description (or Front Panel is blank) No comunication between the Front Panel and the Main PCA. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On…

Code 06:YZ

Description Failure reading/writing NVM in Hard disk. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace…

Code 03:YZ

Description Problem with Power Supply Unit. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Electronics Module Test Diagnostic to…

Code 03.0:10

Description Battery of Real Time Clock ran down. Remedy Replace the battery: 1Turn the printer off and unplug the cable. Unplug any network or USB cables. 2Loosen the screws that attach the formatter to the printer with your fingers, or…

Code 02.1:YZ

Description Problem with the Carriage PCA. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not…