Error Codes

Code 01.3:YZ

Description Device I2C acumen Right Ink Supply Station failure. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables…

Code 01.2:YZ

Description Failure reading acumen chip of an Ink Supply Station. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that there…

Code 01.1:YZ

Description Error in the Print Mech PCA. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace…

Code 01.0:YZ

Description Communication with Main PCA failed. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Remove the formatter and reinsert it again.…

Code 77:YZ

Description Web access application. The web server is not functioning correctly. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that…

Code 75.22:YZ

Description The spittoons (Left Spittoon, Service Station) are full. Remedy • Use Preventive Maintenance Kit #2 to replace the Left Spitton and Service Station.

Code 75.21:YZ

Description The spittoons (Left Spittoon, Service Station) have reached 80% capacity. Remedy • Use Preventive Maintenance Kit #2 to replace the Left Spitton and Service Station.

Code 74:YZ

Description Error uploading firmware update file. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Make sure the connection between the computer…

Code 74.1:YZ

Description Error uploading media profile update file. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Make sure the connection between the…

Code 72:YZ

Description A service calibration must be performed. Check the internal error code to see which calibration must be performed. To check the internal error code, press UP and CANCEL together while the error code is displayed. Remedy • 0x07090001 (gain).…

Code 71:YZ

Description Out of memory failure. Remedy • It is recommended that you remove any unnecessary files from the Hard Disk Drive of the Formatter using the Web Server. • If there seems to be a problem with the HP-GL/2 driver,…