Code 01.2:YZ
Description Failure reading acumen chip of an Ink Supply Station. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that there…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 01.3:YZ
Description Device I2C acumen Right Ink Supply Station failure. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables…
Code 02.1:YZ
Description Problem with the Carriage PCA. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not…
Code 03.0:10
Description Battery of Real Time Clock ran down. Remedy Replace the battery: 1Turn the printer off and unplug the cable. Unplug any network or USB cables. 2Loosen the screws that attach the formatter to the printer with your fingers, or…
Code 03:YZ
Description Problem with Power Supply Unit. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Electronics Module Test Diagnostic to…
Code 06:YZ
Description Failure reading/writing NVM in Hard disk. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace…
Code 08:YZ
Description (or Front Panel is blank) No comunication between the Front Panel and the Main PCA. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On…
Code 11:YZ
Description Trailing Cable does not seem to be detected. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing…
Code 21.1:YZ
Description Fail moving the Primer Motor of the Service Station. Remedy • Remove the Right Cover and make sure the cables from the Printmech PCA to the Service Station are connected and are not damaged. • Perform the Service Station…
Code 21:YZ
Description Fail moving Service Station. Remedy • Remove the Right Cover and make sure the cables from the Printmech PCA to the Service Station are connected and are not damaged. • Make sure that the Service Station path is clear.…
Code 22.0:YZ
Description Left Ink Supply Station error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Left…
Code 22.1:YZ
Description Left Ink Supply Station error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Left…