Code 86:01
Description Problem moving the carriage, most likely due to a paper jam. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 87:YZ
Description Problem finding the Scan-axis encoder reading. Remedy • Upgrade the firmware. • Clean the Encoder Strip. • Replace the Encoder Strip. • Replace the Carriage PCA. • Replace the Trailing Cables.
Code 93:YZ
Description Unable to pressurize the Ink Delivery System. The ISS Motor does not move as expected. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On…
Code 94:YZ
Description Color calibration Error. Remedy • Perform the Color Sensor ESP (spectrophotometer) calibration. You must use glossy paper for this calibration. • If the System Error continues, replace the Color Sensor ESP (spectrophotometer). • If the System Error continues, replace…
Code 51:YZ
Description Window Sensor failure. Remedy • Check that the Window Position Sensor cable is not damaged and is correctly connected to the PrintMech PCA. • Perform the Sensors Test to troubleshoot the problem further. • Replace the Window Position Sensor.
Code 52:10
Description The printer has detected fibers in the Drop Detector. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the…
Code 55:YZ
Description Problem with the Line Sensor (Tetris). The printer has detected a failure to access Line Sensor EEPROM). Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and…
Code 56:YZ
Description Drive roller analog encoder sensor fail or calibration failed. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Media…
Code 58:YZ
Description The Color Sensor ESP (spectrophotometer) of the printer is not working well. It could be any of the following problems: • Problem with the Color Sensor ESP (spectrophotometer). • Communication problem between the Color Sensor ESP (spectrophotometer) and Carriage…
Code 61:YZ
Description The file format is incorrect and the Printer cannot process the job. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. •…
Code 63:YZ
Description Input/Output problem through the network interface of the Formatter. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the…
Code 64:YZ
Description Input/Output problem through the USB Port. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the USB cable is…