Error Codes

Code 77:YZ

Description Web access application. The web server is not functioning correctly. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that…

Code 75.2:YZ

Description Preventive Maintenance Kit #2 counter active. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Change theLeft Spittoon foams and Belt…

Code 75.1:YZ

Description Preventive Maintenance Kit #1 counter active (Scan Axis Components, Ink Supply Tubes, Trailing Cable, Carriage). Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On…

Code 73:YZ

Description Servo Error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If…

Code 72:YZ

Description Generic Firmware error. Remedy • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version.…

Code 71:YZ

Description Out of memory failure. Remedy • It is recommended that you remove any unnecessary files from the Hard Disk Drive of the Formatter using the Web Server.

Code 71:19

Description Default Serial Number found in the main and backup NVM. It seems that both the PrintMech PCA and Hard Disk Drive have been replaced together. Remedy • Perform the gError 71:19 Recoveryh Service Utility 13. Error 71:19 Recovery. NOTE:…

Code 67:YZ

Description Input/Output problem through a Firewire Port. Remedy • Check that the firewire cable is correctly connected to the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. •…