Code 11:YZ
Description Trailing cable does not seem to be detected Remedy Call agent: • Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. Service…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 21.YZ
Description Failure moving service station Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Check the Primer Tubes. Reconnect the power cord, then turn on the printer. 2.…
Code 21:13
Description Problem with the Service Station motor Remedy Call agent: 1. Ensure that the service station path is clear. Remove any visible obstacles (screws, plastic parts, etc.) restricting the movement of the service station. 2. If the carriage has stopped…
Code 22.0:00
Description Service-station-side ink supply station error Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Perform the ink…
Code 22.1:00
Description Front-panel-side ink supply station error Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Perform the ink…
Code 24:10
Description Error detected in ink tube system Remedy Call agent: • Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. Service engineer: 1.…
Code 26:01
Description Ink supply error found during IDS diagnostic test (advisory) Remedy In the front panel message you can see letters representing the names of the colors of the faulty supplies. Call agent: 1. Reseat the faulty ink supply and repeat…
Code 41:03
Description Electrical problem (fault, current limit, overheating) in paper-axis motor Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer.…
Code 42:03
Description Electrical problem (fault, current limit, overheating) in scan-axis motor Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. 2. Reconnect the power cord, then turn on the…
Code 45.1:03, 45.1:10
Description Error in the rewinder 1 system (upper rewinder) Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Remove the paper from roll 1. Reconnect the power cord,…
Code 45.2:03, 45.2:10
Description Error in the rewinder 2 system (lower rewinder) Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Remove the paper from roll 2. Reconnect the power cord,…
Code 46.1:10
Description Error in the upper pump of the PHA blowing system Remedy Call agent: • Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the…