Code 46.2:10
Description Error in the lower pump of the PHA blowing system Remedy Call agent: • Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the…
Phone: +91 99740 44629
| Email: info@rhpsolution.com
O2ML9YjB9mA2
Code 47.5:10
Description Problem at the starwheel lifter motor end of the travel sensor Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on…
Code 47:03, 47:10
Description Starwheel motor error Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Check for any visible obstacles…
Code 08:08
Description A front panel icon does not work (advisory) Remedy Service engineer: 1. Restart the printer. 2. Update the firmware.
Code 09:02:10
Description CIS A Element is failing Remedy Call agent: 1. Clean the scanner of dust and dirt and perform the Scanner Calibration. 2. If the system error persists, upgrade with latest firmware version. Service engineer: 1. Replace CIS A Element.…
Code 09:03
Description File I/O Error Remedy Call agent: 1. Reboot the product. 2. Upgrade to the latest firmware. 3. Go to Jobs > Options > Delete all queue scan jobs. 4. Make sure the hard disk that is installed in the…
Code 09:03:10
Description CIS B Element is failing Remedy Call agent: 1. Clean the scanner of dust and dirt and perform the Scanner Calibration. 2. If the system error persists, upgrade with latest firmware version. Service engineer: 1. Replace CIS A Element.…
Code 09:04
Description Library failed to load. Remedy Call agent: 1. Reboot the product. 2. Upgrade to the latest firmware.
Code 09:04:10
Description CIS C Element is failing Remedy Call agent: 1. Clean the scanner of dust and dirt and perform the Scanner Calibration. 2. If the system error persists, upgrade with latest firmware version. Service engineer: 1. Replace CIS A Element.…
Code 47:10
Description Starwheel motor error Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Check for any visible obstacles…
Code 48:00
Description PPS system failure Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Perform the scan-axis PPS diagnostic…
Code 63:10
Description Network interface error Remedy Call agent: 1. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. 2. Check that the network cable…